will this fit the E?
 

This is a stupid question
but can this 1/5 body
http://i22.photobucket.com/albums/b3...axx/Asgard.jpg
fit the E-maxx??
if i extend the E and stuff like that

If you make it long enough it should work. Just have to put new holes in the body. Where do you get them from and what dimensions does that body have? I have stretched mine some. Could use a longer body.

There was once a guy who made a 'Quad-Motor' maxx. It had four 775 size drill motors, two trannies and was about 28 inches long and weighed 17lbs. He used a 1/5th sized buggy body on it and it looked pretty good. It can be done, but on a relatively stock sized truck, a 1/5th size body might look silly.

that body is a for a VS Modelsport Leopard Bettle
Length..................................720mm
Width...................................435mm
Height...................................285mm
Wheelbase............................505mm
Motor ..........Zenoah G230-04....3.9hp

Can some one please break that down to inches for me? I not sure how big that is. No offense there shadow. I just suck at mm. :)

Just divide the 'mm' figures by 25.4 to get inches.....cant be bothered working it out....:p

Thanks I have to remember that. Is that the truck demisions or the body.

those specs are for the truck the body goes on too

so the truck is length 28.3 width 17.4 height 11.2 wheel base 19.8
I Thinks the body will fit just fine if you stretch it some. say some where around 5 inches or so in wheel base. You would have to measure it out as you go along. You will have to make a chassis to fit you. It depends on you. You can make most any thing work.

yeah i wanna do it but how am I gonna extend the chassis?

You can take a piece of aluminum and cut it down to a lower chassis plate. I had a website that told you about it. Let me find it and i pm it to you.

lol ima do all this jus for that body
that body looks sweet and sleak!!

I seen a guy do a walmart hummer. It turned out good.

I know that is not a hummer. it is a walmart body though.

I like big trucks to. I seen some on another site.check this on out.

nice nice!

hey coolhandcountry wuts the exact width, lenght, wheelbase is your double extended Gmaxx??
maybe i can use your design

or maybe use my own design by buying another stock chassis and lower braces and a thick sheet of aluminum and aluminum L pole from home depot

21.5 inches bumper to bumper
17 inches to out side the tires wide
15 inches form center to center of wheels
Here is a tmaxx chassis you may be interested in. http://cgi.ebay.com/ws/eBayISAPI.dll...ay_Pr2_PcY_BIN

thats a nice chassis but that lenght still wont do
need longer ones
and i found a way to make it longer and still have good clearance
that only adds 4 inches to stock thats 101.6mm
i need to add 200 more to stock

You need to get it out to about 20 inches. So 7 inches longer than stock. Mine is 15 at 2 inches longer. I guess you going to have to make you something. It should look awesome when done. I want to see it when it is done. The bigger the better. If nothing else cut a two pieces of aluminum down and make like the daul plate chassis. Did that other site give you any ideas? Well good luck and hope it works out. Like i said i sure would like to see it when done.

That chassis is what those people with JumboKongs on stock chassis need.

Thats on long chassis.

I run the BPP Torpedo chassis, Its 2 inches longer than stock, which is plenty!

i alrdy counted and add up all the parts i need
i need 2 stock emaxx chassis 2 sets of lower braces about 26 m3x? screws L brace from Home Depot and a thick sheet of aluminum
oh this thing ima do i dont think its gonna happen soon
I still have to think it through to make sure i didnt leave out anything or make a mistake plus i need cash

oh this conversion will make my maxx 2wd
and probably gonna hella heavy so i think ima need another HV_maxx and a couple more gp3300 7 cells

When it said and done. I think it will be awesome. You go for it shadow. I have faith in you. You can do it. Build the big freakin emaxx. :lol

Build it up and put two 7xl on it. That will have plenty of power.

nah ill just buy another HV since i cant order anything via online

When you get it finished i like to see it. I thought about a project simaliar to yours. that sucks that you can't order online. It opens up a lot of windows of opertunity. Will good luck there. Keep me posted.

I'll probably wont start thi project anytime soon maybe next year or l8t this year