Got my MM back today with mods
 

Thanks Griffinru, it looks awesome, really clean work.


My un-modded MM did well for heat on 4s. Now I'm wondering if I should stick with 4s and gear up a bit or if I should go to 5s. How risky is 5s for the modded unit? It is running a Neu 1512 2.5d in a 8ight.

What did you have done to it? Pics please. :yes:

MM mod pics
 

Here she is. I'm not really an electronics guy but I know what quality work looks like. If the guys on the assembly line at CC were this good, well you know the rest.

It's not really about looks though. I'm looking forward to some testing, just have to wait for the latest snowstorm to end.

Those caps are huge! How much was that mod and how long did it take?

Mods
 

I had it back in a little over 2 weeks. (Mostly spent sitting at customs, I'm in Canada) I paid $80USD, shipping included.

Another Job well done by GriffinRU!!!! The man needs a logo that he can put on his modded mamba's.

I gotta say it looks like a factory finish. Well done GriffinRU!

I can sya that artur's mods work well. I tested his upgrades a good bit and was very happy with the results.

Hi ilpufxit,

Good to see that you have received your modded mamba. Looks really good. Now Artur can start on mine he he :yipi:.

Regards,
Joe Ling

Artur does awesome work. He is professional and a real gentleman too. I'm very happy with my modded MM.

Yours is coming...
http://forum.rcdesign.ru/index.php?a...ntry&id=141184
http://forum.rcdesign.ru/index.php?a...ntry&id=141185

Cool
 

Now that's something! I hear NASA's hiring.

How does the cost of building that compare to the cost of buying a controller that can do the same thing?

I think the difference might be that you CAN'T buy a controller that will do the same thing. At least not with consistency.

so when do I send you mine :D it needs some FINE tuning... and fine work it is.

Constantly amazed at the quality of your work Artur! Worth every penny IMHO, having completed a mod and a repair myself.

I would be extremely interested in having my MM upgraded, is there a procedure one has to go through or is it as simple as PMing Mr. GriffinRU?

yah the work is amazing. look great.
yeah just send him a pm .

phil

Thanks, I'll send im a PM and find out what is needed.

Griffin, That is 100% superb work! How much would that kind of a mod go for? Im really interested. I was wondering if youd be able to modify a VXL ESC so that it'll be able to run pass 3s lipo. I want to use it on 5s but the overvoltage is really in the way. I e-mailed traxxas about it to see if they could do anything and they siad that they could not do this mod for some dumb reason of not having enouhg technological support on hand... If you could get the stock 3mm cold soldered plugs off the board and solder on some nice deans 12awg wet noodle wire or deans 12awg ultra wire on that would be great!

Cool deal. Now come up with a mod for the VXL3 to do 4 or 5S lipo and I will send you 4 of them that I have here....lol. 3S limit sucks....

Griffin I sent you a PM.

Hi Artur,

Oh ya. I'm looking forward to abuse it...I mean test it to its limit and then some :yes:.

Regards,
Joe Ling