RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   General Discussion (https://www.rc-monster.com/forum/forumdisplay.php?f=20)
-   -   FMX ramp + Ls10= BIG AIR (https://www.rc-monster.com/forum/showthread.php?t=10218)

rootar 02.15.2008 10:33 PM

FMX ramp + Ls10= BIG AIR
 
check it out ...you can also check out of other videos on there if your bored.

http://www.youtube.com/watch?v=nh7BR5IFN0k

rootar 02.15.2008 10:36 PM

btw thats not much over half throttle...so im thinking i could pull my ramp back another 15-20 feet since i was completely overshooting my landing (thats over 60 feet to flat in that last shot)

rchippie 02.16.2008 12:23 AM

that was AWSOME :smile:. Maybe next time you can throw in a black flip or a front flip.

jnev 02.16.2008 12:34 AM

That is so awesome!! Looks like you've got quite the playground out there to play on. ATV track, 1/18 track, massive kickers, etc. Thats great!! Anything break? If not, must be quite a tough truck.

rootar 02.16.2008 01:34 AM

i guess no wing mounts would have held up to 15 feet high and 60 feet out straight landing on the wing, i broke the bottom screws on the wing mount and bend the top ones and the tops come all the way out the other side and are used for my shock mounts too and one shock cap broke when the screw bent intowards the diff other than nothing broke if i would have taken the wing off nothing would have broke at all. i jumped it about 15 times i just figured id show my first bad jump and first good jump.

jhautz 02.16.2008 04:21 AM

That looks like a hell of a fun bash spot! I'm Jealous. :tongue: I could see doing some serious damage on that ramp. :lol:

rschoi_75 02.16.2008 01:36 PM

great vid, and like everyone else said, perfect bashing spot!

rootar 02.16.2008 03:42 PM

thats only one section of my track, ive got alot more jumps but i gotta wait till i get another shock cap before i can can do anymore, if it goes that far off my ramp it should clear my 60 foot double pretty easy, ive also got a couple of rythem sections i want to send it through.


All times are GMT -4. The time now is 02:43 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.