Need a Quote A.S.A.P
 

Hey mike. Sorry to talk business on the forum, but I know how blocked up the emailing system can get when you have hundreds of orders and such coming in each day.

So, for the revo conversion. I'm not looking to use the gorillamaxx chassis and the works, unless it works out to be around the same price range as what I have in mind.

Ideally, I'd want to get an almost new truck as a roller. I know you worked out something on how to get those. I'd like to use a full gorillamaxx signle speed trannsmission with the strobe slipper and the metal idler.

For the battery mount, I'd probably figure just to strip all the reciever box, batt box junk off. So I have as much room as possible. I figure it could use twin force batt holders, but since they don't make those, I may have to use the associated batt cups. Let me know what you think.

As for the other items on there.

-Lehner 2400XL
-Dodge Truck Body F-150, not too picky there
-Parma Black Spray Paint
-RPM Titan Rims White (offset or not?)
-Proline Maxx Masher tires
-GWS High Torque servo (out of stock now)
-Appropriate pinions

Thanks, sorry for all the trouble. I've just been in a mess of selling things lately to raise the funds for a new adventure in RC. If you don't want to quote it on here, drop me an email at this address

I missed this post for a day or so!
What is the GWS servo you are speaking of? I have a few servos that would fit the bill quite nicely.
A rolling chassis(stripped of the unnecessary items) will run about $225. Brand new. The full single speed g-=maxx tranny with idler gear would be around $100 with all new parts.
Paint-$5+/-
Body - $20-$30, depending on which one
Tires - $23/pair +/-
Rims - $12/pair +/-
Striobe parts/pinions are listed in the store, along with the motor.
Safe to assume you have a controller or will you need this as well?