Help with Quark 125B setup
 

Hi

I have the Quark 125B and it doesnt do what the manual says its supposed to do.

I have connected it up and I have an external batttery pack for it. I plug in the battery pack into the RX unit and the red light on the esc flashes. I switch the external switch and it has no efect on the unit. It doesnt do anything.

I plug in the Lipos and I hear a sound and I pull the throttle and the yellow light comes on and the motor turns. Activating the brake will make the wheels stop and the green light comes on.

How am I supposed to program this thing?

Cheers

It sounds like you didn't pull the red wire out of the throttle cable...