CRT w/MMM...me likey!
 

I got one of my MMM's up and running this morning in my Jammin CRT. Click on the pic below and it'll take you to some more info, including a video:

http://skellyo.com/CRT/crt_sm_1.jpg

FWIW, about 10 minutes running hard in the street with hard acceleration and hard braking. Temps were as follows:

Motor: 126F
ESC: 105F
Batts: 103F
Ambient Air: 86F
Gearing: 13:62

How many lipo cells are you running?

Nice looking, Skell!

I've just read your specs.

Have the nicest of times with this thing..:)

I was going to post a pic of mine, but WOW you make my install look really ugly! Nice job on the CRT!

I can't take all the credit for it. I bought it from rchippie back in January and he had done the conversion on it. I just had to install the MMM, 6.5mm connectors on the motor and put in the Rx.

is it the rcmonster mount?

I sure do build a nice truck :na::lol:. Yes it is a rc-monster crt truggy mount. Sean im glad to see you got it running.

Very clean set up. :yes: And the temp of the ESC is awesome! Can't wait to get my MMM from Mike. :yes:

Nice! I need to finish mine, just have been too lazy to get battery trays on there.

I love how the trackpower lipos have bullet connector inputs so that you can take the pulg out whenever. The lipo parallel setup looks so clean.

coollll MMM again...

Psssssst. It's series. :yes:

Actually got to run it today for a full battery pack.

35.9mph on GPS

Temps were:
Motor 128F
Batts 120F
ESC 100F

I'm quite happy with this setup. It could use a little more top end speed, but it accelerates like crazy.

How was your runtime ?.

Very nice! I just bought a crt of ebay. I am going to be running a neu 1515 1y with the monster max like you, but with 4s 8000mAh packs. I'll be geared 14:62 though.

Bye:mdr:

Nice CRT conversion. Do you know where those battery tray's came from, or where to get some like that?

-Brian