A Burn-Maxx project.
 

Hi, my name is Daniel and i am from france.
My project is to build an E-maxx name Burn-Maxx.
I met Rc-monster shop by a friend, made my first order 2 weeks ago and i was really happy.
And this forum is really nice too, i learned a lot of thins.

I will put some photo and i'm sure i will need some advice :)

Here's the item i have for the moment :
-Radio Hitec agressor CRX 3
-4 Lipo 4S 5000mah
-Esc Mamba Max with a fan
-Brushless NEU 1515 1Y/F with a fan
-Chassis Gorilla G3 race alu
-FLM arms
-Shock tower FLM
-Bulk brace FLM
-Bulkhead FLM hybrid for 1/8 diffs
-Integy steering block Super-Duty Type II
-8 Integy shocks MSR5

http://img261.imageshack.us/img261/9...0323ye0.th.jpg
http://img141.imageshack.us/img141/9...0328yq2.th.jpg
http://img261.imageshack.us/img261/6...0333we3.th.jpg
The front http://img141.imageshack.us/img141/9...0329tn9.th.jpg
The rear http://img261.imageshack.us/img261/1...0331wo0.th.jpg

I am waiting for a lots of other items, i'll update this thread as fast as i can.

Looking really good, nice choices ! and welcome to the forum

Welcome to the fourm! Nice truck also.

Hi, everybody, thanks for your replys.
I got a problem, i instaled Integy steering block Super-Duty Type II and i got a problem cause i don't have access to the hole of the stub axle to fit the axle pins. here's the photos http://img392.imageshack.us/img392/7...piervw7.th.jpg http://img392.imageshack.us/img392/7...0334kc0.th.jpg

I bought that diff http://www.rc-monster.com/proddetail...GY_DIFF&cat=47 so wich driveshaft you advice me to fit correctly the integy steering block and the diff.
Today i received the shocks and i build two of them, they are very nice.
http://img403.imageshack.us/img403/6...0337oq1.th.jpg

Thanks for your help.

Either you use cvd's or the 3906 axles for that knuckle. The knuckle you have will not work with the 3905/revo axles.

Since you also bought that diff, you'll be better off by using either MIP, Traxxas or UE cvds.

Thanks George, is this one is good and strong http://www.rc-monster.com/proddetail...mip1525&cat=47 ?
Thanks

Not as strong as the Unlimited Engineering cvds but they will work well.

Ok thanks, for the UE item i can't order on their shop cause they don't accept paypal and french visa card.

MIP makes some 3.3 cvds that are a bit beefier than the 2.5 ones and the arms you are using looks like they will accept them.

I ordered 2 MIP Shiny CVD Kit, this one http://www.rc-monster.com/proddetail...mip1525&cat=47
I wish they will be the good size.
Thanks again guys