crt .5 pro roller value
 

I happen to find a .5 pro roller and the guy wants $175 it allready has the rcm motor mount and he was running a vxl system in it...is it worth $175?

no electronics exept for the servo...looks fairley new

Seems good value - Prices have dropped but I paid that and traded a MGM80 and a Feigao S / RCM heatsink for a for a regular CRT.5 with a servo!

I like the price I paid for my CRT.5: $0.00 :wink: The whole order was a confusing mess (won't mention the place) and they never billed me for it. Tried telling them that they forgot to bill me, they said they'd take care of it, but never did.

wow nice Brian

well $175 sounds to high....I offered $125 but he refused..I may go $150

The truggy kit runs for $250 and it has a $35 mount - I wouldn't drop below $175 (maybe 165) if i was the guy...

I paid around that amount or a little more for my CRT.5 w RCM motor mount, then paid a little more for him to throw in a blue groove kit (soon to be replaced)

It also depends on how beat on the chassis and body are, as well as what kind of tires and wheels come with it. If it's in great shape and has at least 1 good set of tires/wheels, I agree with Arct1k on the price.

its in new shape...looks like he built a plexiglass battery seperator with a esc mount built in

http://www.rgcbuilders.net/crt.jpg

http://www.rgcbuilders.net/crt2.jpg

I piad $132 for a used nitro one on ebay it had less than a quart of gas threw that eninge (which is for sale) it took me a while to find one with that price. check my crt.5 custom build thread for pics.

i paid $190 for my crt.5 roller with the rc monster motor mount and 645mg servo

I paid $250- w/shipping for my roller, but it had Mike's ext. chassis kit and a bunch of x-tra parts.

Does he have any pics of the bottom of the chassis?

I paid $165w/shipping for my roller w/ RCM mount, no electronics, and a few spares. However it wasn't thye pro chassis. I spent another $45 for the extended pro chassis, $30 for servo, $100 for rx, $115 for motor and used the MM I already had. That one doesn't look to be in bad shape and it has a way of mounting a battery, I also had to make an aluminum battery box. $175 doesn't sound to far off, as said if I was him I wouldn't go lower than $165, especially with a servo.

I would pick it up.
I've been looking for one of those.
Price seems fair.