Need Battery wiring help
 

I am using 3 - 2 cell hard case lipos in series. Is there a way to combine the 3 taps to a 6 cell tap so I can use my blinky to balance all the cells together? :neutral:

yes - You just need 3 2s female adapters and 1 6s male adapter - The hyperion lba10 manual has the instructions - You just need to be careful to match the battery pack order on the series adapter to the balancer adapter.

I built a couple of 2 x 2s to 4s balance adapters this w/e.

I used BrianG's page as a guide.

I use my harness to balance/charge two 3s packs as 1 6s pack;

http://www.scriptasylum.com/rc_speed/_lipo.html

http://i87.photobucket.com/albums/k1...m/IMG_1407.jpg

here's his guide/pic for a 2 2s- 4s set-up
http://i87.photobucket.com/albums/k1...2s2s_wmain.gif

SWEET!!! Thanks guys, I love BrianG's site!!!!