Testing Hobbywing's eZRun with my 4 pole motor
 

I'm posting this here, because there's no micro section. I went to the track on Thursday to test my 4 pole motor in my Recoil. Man, I'm very pleased. It's a perfect match for the Hobbywing's eZRun 35A esc. The motors will be available in 6000, 7500 and 9000Kv. I also ran my RC18R with a nice Exotek chassis and Hobbywing's eZRun 18A/5200Kv motor system. Here are the videos and pics:

http://www.youtube.com/watch?v=zXhGr2IuxUg
http://www.youtube.com/watch?v=9jdA2TkkTbY

http://i260.photobucket.com/albums/i...h/DSC01677.jpg
http://i260.photobucket.com/albums/i...h/DSC01680.jpg
http://i260.photobucket.com/albums/i...h/DSC01690.jpg
http://i260.photobucket.com/albums/i...h/DSC01691.jpg
http://i260.photobucket.com/albums/i...h/DSC01696.jpg
http://i260.photobucket.com/albums/i...h/DSC01699.jpg
http://i260.photobucket.com/albums/i...h/DSC01701.jpg
http://i260.photobucket.com/albums/i...h/DSC01673.jpg
http://i260.photobucket.com/albums/i...h/DSC01672.jpg
http://i260.photobucket.com/albums/i...h/DSC01671.jpg

Two more:

http://i260.photobucket.com/albums/i...h/DSC01670.jpg
http://i260.photobucket.com/albums/i...h/DSC01669.jpg

That is the same ESC im running in a Traxxas Bandit with Trinity Brushless 13.5T and 2S Lipo. It has never gone over 95F. Excellent ESC, espeically for the price

Their nice ESCs and a perfect match for my 4 pole micro motors. I'll probably ask Hobbywing to make me a lutach edition to go with them.

Very nice. I'll think about getting a 35a or a 60a for something...

Little update. As most of you know, I'm having a micro ESC being made. The prototype is done. I will test it soon as I'm waiting for other products to be made. The production unit will have a thinner heat sink and it will have a capacitor bank with 2 caps (I attached a picture of the cap bank that will go on the 100A and 200A units). Here are some pictures of the soon to be 40A micro ESC:

http://i260.photobucket.com/albums/i...ch/LT-40A1.jpg
http://i260.photobucket.com/albums/i...ch/LT-40A2.jpg
http://i260.photobucket.com/albums/i...ch/LT-40A3.jpg
http://i260.photobucket.com/albums/i...ch/LT-40A4.jpg
http://i260.photobucket.com/albums/i...ch/LT-40A5.jpg
http://i260.photobucket.com/albums/i...ch/LT-CAP2.jpg

Very nice...In the Spring I am going to upgrade the Mamba system in my 18B from the 5400 system I have now to something is the 9000kv range. I look forward to your future posts.

lutach, what will the esc pictured be able to handle.

Hi all,

Just a little update here. I had the factory do a 2 small cap bank instead of the sigle cap and as soon as the 40A arrives, I'll begin testing it. Here is the latest picture:

http://i260.photobucket.com/albums/i...ch/LT-40A6.jpg

It's rated for 40A and shoud handle 3S lipos with no problem.

I saw a real brushless motor on your brushless controller. :) Actually it's a complete brushless system include controller, motor and load(the fan).... ^_^

My micro brushless ESC is not out yet. They were made to actually compete against the Hobbywing 35A. I'm going to offer them along with my own 4 pole motors which will have various Kv ratings and sizes.

Luciano,

PM me with prices for the motor/esc combo when they are available. I think I need at least two sets..

No price yet. I will test them to their max to see if they will be the right combination. It maight take a some time before I even ask the factory for prices.