Can I use A123 7s2p with MMM v.3?
 

Can I use A123 7s2p with MMM v.3?
How many minute or hour for conclusion that MMM V.3 is pass?

Thank you for advance.... :yipi:

It's less than 25V so it should be good

thank you basso.
a123 = 3.6 x 7 = 25.2 volt
No others can answer my question, CC ?

you should be good thats about the same voltage as 6s lipo

I've run 6S A123 but not 7 yet.

At the very worst just charge to 95% (if your charger can do this.) The last voltage ramp up adds hardly any mah to the cells anyway, so if you stop @ ~3.5v/cell you are not really losing anything.

6s lipo is 25.2 fresh off the charger (4.2v/cell). 7s A123 is also 25.2 fresh off the charger...as long as you use a typical CC/CV charge profile and not some "zip cord" charging method. So, it'll work...

plus as soon as you add throttle the voltage goes down. I also plan on running 7s2p a123 with the MMM.