mmmv3 success or not?yes another tread!
 

so after 1 month i can say that the v3 is a great esc(after 6 hours of hard street bashing)on both of my v3 (sometimes the esc was completely out of is case at the end of my run:surprised:)...but what about you guy's...as i read only 5 units failed...we can statuate that cc as definitively made a reliable esc:yes:....for less than 180$ im sold....:whistle:the mmmv3 joined the rows of the mamba max reliable esc:whip:



well this what i think:rules:...so i will not afraid to buy a e-revo bl-edition with the mmmv3 inside:mdr:

That is a very good thing to hear. But why would you need to buy the Traxxas Brushless Edition if you basically already have one? Unless you were going to buy it for me of course, I'm fine with that..... :yes:

Been running mine on 5+6s for almost 2 weeks now. Very smooth start up. This esc allows amazing amounts of power!

Success

Success! Mine broke free from it's mount yesterday at the track. When my lvc kicked in and brought the buggy into the pits I was surprised to see my MMM loose and free to bounce around as my buggy turned laps of a bumpy, jumpy course. I resecured it and still going strong.

Mmm V3
 

Mine is still working just like the day I got it. Congrats to Castle for making the changes to have a reliable and affordable ESC.

very good Esc this time. My 1st v3 died. But #2 is going strong! It is in my 80 mph rustler now

They need to start a V3 poll.That way they can see what a great success they have.

I have over 4 hours of hard racing on my V3 MMM. I think the V3 is going to hold up!

Well, is it available at stores, now?

I've got the v2, but I haven't tried it out yet. It just gives me the creeps to think about it.

Well I have 2 a v3 and a v2 that is flashed. I havent ran the v3 yet. The v2 that is flashed is perfect. Its taking everything I can throw at it. It works perfect!
GREAT JOB CASTLE!! The mamba monster is a killer esc!

I have one V1, one V2, and one V3 all with the new firmware, and they are all going strong. :party: :great:

so i decide to test(hard test)my esc..i put a hold tire on my truck and pushing my revo against the wall...just apply a little trotle..i seee that its very diffucult for the esc to spin the motor i dont apply more trotle just for he wheel spin slowly (im always against the wall)...the esc fan come to life early:yes:(155f after 5 min) than i stop it....to hard for the esc:whip:

after that all my unit run flawlessly..but my v1 unit run cooler dur to the fan who alway spin....

My V2 with the new firmware and V3 case is working like a champ on 4s, 5s and 6s with a 1515/1y geared 24/65 in an E-Revo.

5 hours up in Maxx
Feigao 7XL-8XL
A123 6s2p
gear 62t/20t
still running but dunno when it will dead like V.1