RC-Monster Forums - Using a SR3100 (DX3R's RX) in a EMaxx 3906

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- General Discussion (https://www.rc-monster.com/forum/forumdisplay.php?f=20)

- - Using a SR3100 (DX3R's RX) in a EMaxx 3906 - 2 Speed Tranny? (https://www.rc-monster.com/forum/showthread.php?t=16875)

rawfuls

11.26.2008 08:21 PM

Using a SR3100 (DX3R's RX) in a EMaxx 3906 - 2 Speed Tranny?

Well, I have the 2speed tranny, and want my DX3R to be completely compatible...
Should I be using a Y harness? Since I need to connect the Shifting as well as the Steering... Or do I just setup the Aux? and if so, how? :neutral:

brushlessboy16

11.26.2008 08:35 PM

Does the Transmitter have a Auxilary channel?

If so then you just plug it into aux.

DickyT

11.26.2008 08:38 PM

The sr3100 has an aux, plug the shifting servo into aux.

bdebde

11.26.2008 09:50 PM

Plug into aux, and on the radio you should have the choice of linear or 3 position. I think you will want the 3 position so you can shift with a click of the button.

rawfuls

11.26.2008 11:48 PM

Will I need to reset the EPAs?

All times are GMT -4. The time now is 10:44 PM.