My Wreckluse !!!
 

This is a little project I have been working on for about 3 months. When I first saw the RCP Wreckluse I knew I had to pick one up. I haven't had a 2.2 scaler in about 2 years, I have been running the 1.9 stuff. My plans are for a full interior, Scaleoffroad working Warn winch, and alot of other scale goodies. O yea I frickin HATE styrene. :lol:
http://i192.photobucket.com/albums/z...9/100_2024.jpg
http://i192.photobucket.com/albums/z...9/100_2023.jpg
http://i192.photobucket.com/albums/z...9/100_2022.jpg
http://i192.photobucket.com/albums/z...9/100_2021.jpg
http://i192.photobucket.com/albums/z...9/100_2025.jpg

http://i192.photobucket.com/albums/z...9/100_2027.jpg

Ax-10 Axles
Ax-10 Heavy duty ring and pinion
Ax-10 Universals
Ax-10 Trans
RCP Ax-10 Kncukles
RCP Ax-10 Axle c
RCP Ax-10 Lockers
RCP Ax-10 Straight axles adaptor
RCP Ax-10 Stainless steel straight axle
Proline Flat Irons
RC4wd Python 2.2 beadlocks
RC4wd 110 mm dual spring shocks
MIP Ax-10 drive shafts
JR 8711 steering servo
All stainless steel hardware
Holmes Hobbies handwound 25 turn motor
Tekin FX-R esc
CCBEC
SR 3500 Spektrum RX

Finally it's a roller !!!

http://i192.photobucket.com/albums/z...9/100_2032.jpg
http://i192.photobucket.com/albums/z...9/100_2029.jpg
http://i192.photobucket.com/albums/z...9/100_2038.jpg
http://i192.photobucket.com/albums/z...9/100_2037.jpg
http://i192.photobucket.com/albums/z...9/100_2036.jpg
http://i192.photobucket.com/albums/z...9/100_2035.jpg
http://i192.photobucket.com/albums/z...9/100_2034.jpg

Chassis mounted Jr 8711 steering servo.
http://i192.photobucket.com/albums/z...ip_069/018.jpg
Scaleoffroad working Warn winch in place and mounted.
http://i192.photobucket.com/albums/z...ip_069/017.jpg
I just need to sandblast the chassis and get it powder coated silver.

The chassis after powdercoat.

http://i192.photobucket.com/albums/z..._069/006-2.jpg

http://i192.photobucket.com/albums/z..._069/007-2.jpg

Sacleoffroad winch all mounted up !!!

http://i192.photobucket.com/albums/z..._069/005-2.jpg

http://i192.photobucket.com/albums/z..._069/008-2.jpg

http://i192.photobucket.com/albums/z..._069/009-2.jpg

http://i192.photobucket.com/albums/z..._069/010-2.jpg

http://i192.photobucket.com/albums/z..._069/011-1.jpg

Nice job so far. :yes: Can't wait to see it finished!

That is SO sick. Excellent work!

Thanks guys !!!

wow that thing is going to be awesome. Well its awesome now but I cant imagine it once you get it completed.

So this is what you're doing with your time while the SC8e collects dust awaiting completion? :mdr:

No waiting on the guy to finish the parts up and I am working on a RC8e as well. It will be powered by a MMM / 2650 KV Castle combo on 4s. I am going to use Mike's RC8 conversion, JR 8711 steering servo,and a Spektrum SR3500 rx.

awesome build. If my hands worked better I would for sure build a scaler. I looked into those winches, wow! Spendy! But soooooooooooooooooooooooooooooooooo freakin' cool!

That is sweet Chip...well done!

Thanks, the winch is kinda spendy but it's the cool factor. There is a cheaper version out now but you get what you pay for.
Thanks man !!!

Looking good Chip! Look like your styrene skills are getting pretty good... I am too lazy for that, I just buy a toy body with full interior!