Revo Hybrid diff Shims
 

Hi,
Looking at redoing my Hybrid diffs. Question is what shims will I need? Thanks for your help in advance.

Depends on the version you are using, they mostly use 8mm id shimms all around.

I bought a set from Kyosho, with 10 of each, .1, .2 and .3 mm. some .05shimms would be nice too, i don't think they need the .3mm, since they are produced with pretty tight tollerances. (at least the ones I had, which where the 1st gen)

Key to perfect shimming is to make them as tight as possible, without any noticable gear-rubbing..

Thanks Serum

How can I tell which version it is? I brought the Revo used. All i know is its running HB truggy diffs, and I wish to convert them to the HB buggy.

Do your diffs use 6 or 8 mm pinion gears?

I found out the diffs are V2 from the seller. So what shims will I need?

does any anyone know the part numbers of the shims I need? I've got the V2s

Thanks

have you tried calling/E-mailing the manufacturer? just a thought....