tower pro servos?
 

are they any good? the digital ones on ebay have nice specs.
this is the one im looking at # 6027959285

I don't see a torque rating on it. I may have missed it. Been known to do that. What are you going to use it for?

It's rated at 13kg/cm, which converted to oz./in. is 180.5oz./in. Not too shabby!

It's from Hong Kong, no surprise there. It's also from Dinball (aka: RC Mart), they're really cool and do a great job getting their stuff over to the US. That price is great though, and they say it's basically a KO Propo servo.......whatever it is, I'd say it's worth the $25 to check it out.

cool guys i think ill pick up 2 of them for my custom truck :)

:edit: went on to ko propo's site and see if the servo they say is the same was even a real servo and it is :D

http://www.kopropo.com/servos.htm

go down to the pds-2344 fet specs out the same as the tower pro servo:cool:

this one is ok isnt it? 195 oz/in for only $38

http://www.rc-monster.com/proddetail.php?prod=BMS660mg

No. This Tower Pro servo is a FET servo, and is the same as the Ko Propo one that stampy listed.

well cross that of. i dont wont to spend 50 bux on servos if there kinda ify. so im going to buy a jr z9000t from a guy on here then buy another one and run those. so ill have 600+ oz of torque to turn my tires :p can i say OVER KILL :L:

lol i dont think you can say overkill if your gonna do that lol.

I thought the 333 oz of torque was plenty to turn my tires. Why you need so much? 300 is more than enough to turn the tires on grass at a stand still.

well i dont have to but thats how i have the truck setup. if i wonted to run just 1 id have to change some stuff.

why have 300 when you can have 600!

well i got my z9000t today and ive got a problem :( . it twitches like mad. any body know why? i threw my old jr standard servo in there and its fine to twitching or nothing. im using a jr xs3 synthesized radio with a rs300 receiver to power the servo i used 2 things, i used the bec from my duratrax esc and then i used a 4 aa receiver pack (it twitched with both so i dont thing its the power source) is it maby because its digital servo on an analog receiver maby?

o and all the betteries are fresh so that shouldent be whats causing it

well for some reason this servo doesnt like my radio system because i threw the servo on to an old 75mhz am futaba radio sytem i had and it works fine :mad: wtf all my other standard non digital servos work fine with my jr radio but this servo freaks out:devil

after 28 days of waiting I just got mine. I would go test it out but there for my crawler project and I'm awaiting a frame.