2nd Version "MaxxEXT 2.0"
 

Hi, and hello folk :mdr:

here's my Maxx experience

And it starts with my E-Maxx 3906 in 2003 (Slightly Tuned)

http://i593.photobucket.com/albums/t...Visa1Klein.jpg

after a bunch of spare parts the 1st Version/step, make a new chassis based on the Gorillamaxx chassis the parts are designed with CAD and machined on a CNC milling machine the plates made of AlCuMg1 (3.1325)EN AW 2017 the braces are AlZnMgCu1,5 (3.4365)EN AW 7075

here a pic of the raw shap
about 1cm more length than the stock chassis (2004)

http://i593.photobucket.com/albums/t...1786_klein.jpg


here one pic form one of the last rides with my first BL-Setup before changing
(Hacker/ Master Car + Hacker C40-10L/ 2004)

http://i593.photobucket.com/albums/t...First-Chas.jpg

next setup Schulze 18.97kw/ Plettenberg BigMaximum/ UE-8spider with Savage spurgear
and XCR Suspension AA7010/ 2004

http://i593.photobucket.com/albums/t...2nd_Cahass.jpg


now it’s finished 1st Version (2005)

GA-Bulks are sweeeeeet!!!!
RacerX Shocks
UE-8spider
XCR Suspension
cvd- UE rear center + MIP front
skid ???
cage ???
Chassis selfmade
schulze
Bigmaximum
Savage 49Spur
49/20

http://i593.photobucket.com/albums/t...00109Klein.jpg
http://i593.photobucket.com/albums/t...00108Klein.jpg
http://i593.photobucket.com/albums/t...00105Klein.jpg
http://i593.photobucket.com/albums/t...00112Klein.jpg
http://i593.photobucket.com/albums/t...00114Klein.jpg
http://i593.photobucket.com/albums/t...00115Klein.jpg
http://i593.photobucket.com/albums/t...00118Klein.jpg


to be continued

afer that I have the same problem as any one with such a BL-Setup “wheely maschine” :intello:
so I decide to make my Maxx a bit longer. to be save I make the Maxx 10cm longer than stock :whip:

went back into my CAD and make a new EXT Maxx chassis (2005)

here it is :eyes:

http://i593.photobucket.com/albums/t...sometrieII.jpg


next step CNC work

Very nice!! :great:

http://i593.photobucket.com/albums/t...00108Klein.jpg

^^^ Favorite pic. The Plett looks like a turbine intake. Probably sounds like one, too.

after a lot sun, water and kite-surfing i'm back into rc

i make the chassis last 2007 and a last version 2008
also i required was a 168mm long center driveshaft in the rear
and i make a new e-maxx input shaft to handle the revo slipperunit


and here we go 10cm/ 3.93700787 inch longer as the stock 3906Maxx

http://i593.photobucket.com/albums/t...0128_klein.jpg




my "MaxxEXT 2.0"

switched to Bk 9920/ 20XL-12
with Schulze LipoDimatic-14
6s2p kokam
revo slipper 40spur
40/16 testing in 2nd gear

http://i593.photobucket.com/albums/t...lein_front.jpg
http://i593.photobucket.com/albums/t...klein_heck.jpg
http://i593.photobucket.com/albums/t...n_overview.jpg




Chassis mounted low (not lowest)

http://i593.photobucket.com/albums/t...n_low_side.jpg
http://i593.photobucket.com/albums/t...n_low_heck.jpg


Chassis mounted high (not highest/ but high enough)

http://i593.photobucket.com/albums/t..._high_side.jpg
http://i593.photobucket.com/albums/t..._high_heck.jpg

Topview

http://i593.photobucket.com/albums/t..._klein_top.jpg


Bottomview

http://i593.photobucket.com/albums/t...121_Bottom.jpg


left hand side

http://i593.photobucket.com/albums/t...t_overview.jpg


right hand side

http://i593.photobucket.com/albums/t...ft_overvie.jpg


backview

http://i593.photobucket.com/albums/t...shocktower.jpg


transmission/ esc/ motor

http://i593.photobucket.com/albums/t...ein_ESC_BL.jpg
http://i593.photobucket.com/albums/t...motormount.jpg
http://i593.photobucket.com/albums/t...in_slipper.jpg

and we are back in 2009 :lol:

:surprised: Please don't drive it. I'd hate to see it get dirty. So is that effectively a 1/5 yet?

ya "What's_nitro?"

as i sold it i clean it up and i found bees and grass in therein

but the pletti i gone to brutal

thx

Why did you sell it??? :neutral: I could never sell something I put that much work into.

wheelbase is axle to axle 425mm/ 16.7322835 inch

and wide Maxx xcr suspension

why; if you build it once why not twice ?

oh i misunderstand you mean the pletti or the car ?

i mean the pletti because it is to powerfull i thought

I meant the truck. :mdr: I guess redesigning it kept you busy, huh?

Man, I would kill to have that Pletty. Seems as though the black Big Maximums with the larger fan are harder to come by.

All Big Maximums have got a fan, I thought...

Anyway, you've got a BEAUTIFULL car! It's really excellent! I like it now it's 10 cm longer :yes: