flux motor mount doubt
 

hello i received yesterday my new castle motor............

http://cgi.ebay.com/ws/eBayISAPI.dll...m=110400599837

but will this version fit in the flux motor mount?
iam asking that because the flux one don´t have the heat fins all around like this i bought...........

regards

I do not believe it will fit.

don't fit....:no:

and now what solution do i have?

Sell the trx motor and buy a flux motor.

Any neu 15 series motor will fit the flux mount...

Just FYI...

send it to me. I do the machine work on those for the castle motors. You ship it here, pay $20 plus shipping back. Then it fits.

i've seen a guy dremel the flux mount to get the CC motor to fit. it was on rcu somewhere.

i have a dremmel and good acessories . is hard or difficult to machine this?
i only see 2 mm´s i have to machine and only on the place here the mount will attach...

regards and thank´s for the help

Please post pics when you are done!

I made up a program and fixture for the cnc machine. takes 5 minutes. thanks to that i haven't used my dremel for like 5 years. that's all I got.

so or the motor or the motor mount one of the two will take a dremmel job...
maybe i will dremmel the motor moun too a little.
i have some companies here that do cnc jobs and i will ask them if they do thi work..

regards

my motor mesure 40 mm diameter and now i discover this:

http://www.hpiracing.com/products/en/100685/

the tork one mesure 39.98 so i think that will fit stock mount with no problem.
this weekend it will be tested so i will tell you later how it works!!

regards

its the same motor with a little different can. is there meshing issues?

i haven´t received the flux already for test it on the mount.
only friday i will check if it fits good and without getting out of place.