move the reciever?
 

finally have made my mount for the brushless ESC, i have it mounted where the other motor was. anyways the motor and BL ESC look to be almost hovering over the reciever, i was woundering if this will cause interfearence(sp?) issues and if i should move the reciever to where the evx used to be. can't run it yet because it's been snowing again :035:, maybe it'll melt soon for a long enough period to let me try it out

got a 9920/9L btw

It wouldn't be a bad idea to move the receiver. In my 1/8 electric buggy, I had the receiver mounted behind the motor, and got terrible glitching - I tried everything except moving the receiver, and once I did, the buggy became driveable.

You could try it first. Sometimes you have it some times you don't.

and another trick is to cover the antenna wire from the receiver to where your antenna tube is mounted with fuel tubing to insolate it from contact with metal - which can be a bad thing...