charger ???????'s
 

need a good charger , 1 that charges up to 6000 mah and does 2c charges . what do you guys recomend ?

I love my Hyperion. I have the 0610i which does up to 6 cells at 10a at 250w. Wattage is what you need for large packs. 22.2v(12a)=266.4 watts. Make sure your power supply is up to it too.

Also look at the TP1010c, FMA chargers, and a few others.

Check out the Ichargers, I just got one and it is great.

Just looked at those and the 20A model would be sweet if it could do 2 batts at once. With 20A and 350W it should be able to handle it, but, the programming is probably not set up for it.

The chargers look nice though

The balancer boards (sold seperately) allow up to the max cell charging; 2 x 3s on 6s model and 2 x 4s on 8s model and so on, just need a y cable on the main lead.

12 amps is what you spec. If you'll put up with 10 amps (there's many chargers with a 10 amp limit) then for 2S you may like the 989 MRC superbrain. For 3S you might like the Checkpoint TC 1030. There are also many Chinese chargers that will do 2-6S at 10 amps. (i-chargers are one)

Alot of the lipo battery companies say not to use the MRC chargers because they don`t use the constant current/constant voltage standard of charging