Hobao Hyper Sc10
 

Well, here's mine. Very fun little truck.

http://i198.photobucket.com/albums/a...4x4/sc01-2.jpg

http://i198.photobucket.com/albums/a...4x4/sc02-2.jpg

http://i198.photobucket.com/albums/a...4x4/sc03-2.jpg

http://i198.photobucket.com/albums/a...4x4/sc04-2.jpg
HN SBB shocks

http://i198.photobucket.com/albums/a...204x4/sc05.jpg

http://i198.photobucket.com/albums/a...4x4/sc06-2.jpg

http://i198.photobucket.com/albums/a...4x4/sc07-2.jpg
2.7kg with 3S 3300mah Lipo

http://i198.photobucket.com/albums/a...4x4/sc07-1.jpg

Right now, she running a ZTW 11.5 turn BL with matching sensored esc. Stock gearing 12T pinion.

A Neu 1415 is on the way hopefully soon.

Regards,
Joe Ling

Very nice Joe. How is the speed with set up and how does the over all durability look to you. Any week spots, etc

Love my sc10 pro as well.. she's a sweet truck.. only broken part having raced it about 3 times is a body post. I do have losi 8ight front shocks all the way around as well. Im running a MM w/ a 50mm Medusa 4800kv motor.. she flies.. 2s lipo.

http://i172.photobucket.com/albums/w.../Ofna10scb.jpghttp://i172.photobucket.com/albums/w...linh/008-2.jpg
http://i172.photobucket.com/albums/w...mblinh/011.jpg

Hi,

Just took her out for the first time without any proper setup with the smaller oem shocks. Handling surpringly good but not buggy good. Speed with the weaker 540 sized motor is a little lacking but least it ran cool in this hot & humid climate in Malaysia.

Decided to put in some bigger shock but still have not changed the diffs to fluid though.

Also thinking about going up 1 tooth to 13T to get more top end.

Regards,
Joe Ling

Joe, where are you located in Malaysia? We might go there in a few months (Penang).

Hi George16,

I'm located on the island of Borneo in East Malaysia. I'm only 1 river across from Brunei.

Regards,
Joe Ling

Hi Joe, I m getting a scrt10 soon. We will hv sct race soon also:)

Well got my truck out on the 1/8 scale track this weekend w/ some of the HUGE doubles and triples and finally broke a few things..

2 more body posts.. doing a traxxas body post mod to fix this issue *rear
1 front top arm (new verisons of this part out)

I took it apart and did a few mods as well.. replaced the inside steering with an associated ball end and on the inside turnbuckles I used a long RPM ball cap.. this makes for more steering and a little less slop at the same time. I also used my dremel to take a touch of material off the diff case where the ball end hits to gain a touch more steering.. and a lil material off one side of the steering knuckles.. you can see one side has a lot more material when looking at them, all pretty simple mods.. Nice to have a touch more steering in the technical areas. I'm thinking about ordering a few jammin parts to stiffin the brace btw as well.. forget where I saw this but it works out well for about 25. This isn't needed but why not :)