Bash RC10Gt BL powered I need suggestions!
 

Well i am in the notion to get her runnin so all i need are the motor mount a nice setup to get about 45-50mph outta her tops and it'll be a basher as well so i'll most likely be runnin masher tires with stiff springs so that i can go jump some stuff at the track.......i

I need help

come on guys i need some suggestions one where to get one so that i can jump start this project!

isnt the RC10GT a nitro convertion of the RC10T4 (i may be wrong) in that case id just get a T4

How many cells? that's the question. I'd go for a lehner basic,i use a 4200 on 8 and 10 cells and on 3s lipo.It's a little power house in a stadium truck.The 1920 would be the business if you want to spend that much,i've got a 10 turn that goes very well on 3 or 4s Lipo,runs a bit cooler and smoother than the basics.

well i'd run around 2 or 3 lipo's in her so the lehner would be a good motor what about? the feigao 9c or whatever it's called...i'll be running it max ride height,new-era roll cage....it's the old style chassis so i have to find a way to make the body fit and it'll be running Masher 2k's all around

Monkey: I won't get a T4 cause this car is readily available and i've spent well over what i should have in the past month on new projects and plus i got the car as a roller with engine and working radio for $67 bucks off ebay a while back.....

Also i need to find a way to strenthen the chassis more i was thinking of taking some traxxas links and mounting them along the side rails...and i need a sturdy motor mount so that i don't strip spurs!

what about a feigao s type motor like 6 or 8s? i'll be running 7-cells prolly maybe more depending......i won't run more than 12 cells though...so i wonder what'd be a good powerplant for that man batts

Contact Cold Fusion over at the radiocontrolzone forums. He sells aluminum motor mounts for $22 shipped.

hey thanks alot man...

well got my parts i'll make a new post once i get some of the parts in and make a build up thread...next week i'll need to get some parts...any ideas on what pinon to use?

i just need 5mm pinion and that should be it