Acquired this as part of a trade. I have no interest in this truck and could use the funds to finance another build.

:gasp:*** CUSTOM T-MAXX ROLLER ***:gasp:
- RED RPM UPPER & LOWER A-ARMS WIDE SUSPENSION (USED)
- BLACK RPM FRONT & REAR BUMPERS (USED)
- NEW FRONT, CENTER, AND REAR DRIVESHAFTS
- NEW AXLE CARRIERS (KNUCKLES) & BEARINGS*
- NEW FRONT & REAR SKID PLATES
- NEW STEERING ASSEMBLY
- NEW CHASSIS BRACES
- ALUMINUM FRONT & REAR BULKHEADS WITH BRACES
- NEW SERVO MOUNTS (STEERING / TRANSMISSION & THROTTLE / BRAKE)
- BATTERY BOX SET-UP FOR RECHARGEABLE BATTERY
- NEW REVO SPEC SEALED DIFFERENTIALS*
- TITANIUM* TURNBUCKLES FOR FRONT AND REAR
- NEW FUEL-LINES
- GOOD USED TRUCK BODY
- USED WHEELS (GREAT SHAPE)
- USED TIRES W/ FOAM
- TRANNY CASE WITHOUT GEARS (YELLOW)

** Great starter for a Maxx Build/Project/Basher...
** Or parts wagon, alot of good parts...
** Good combination of plastic and aluminum...

"*" - NOT VERIFIED

OFNA Jammin X1 Buggy Roller
*** This includes the items below... Get it now before it is gone!

** X1 Roller
** Panther Foam Inserts
** New Chassis
** Aluminum Differential Cups
** Spare Parts

NOTE HAD PLANNED TO CONVERT TO BRUSHLESS, IF INTERESTED CASTLE CREATIONS HAS A CONVERSION KIT FOR THE JAMMIN X1 ON SALE FOR A VERY LOW PRICE! :surprised:YES ONLY ___!:surprised:

FS: Brushless Set-Up for a 1/8 Truggy Set-Up...

Tekin RX8 ESC and T8 Motor :whip:

** GREAT CONDITION AND OPERATIONAL **

T8 -- TT2323 / 4038T / 1550KV

The on/off switch is missing, because had to make the lead longer for another project / set-up. There is about 3 to 4 inches left. Also when the connectors were sauteed the top of the fan cover melted a little; does not effect the operation.:diablo:

:gasp:There was a request for some additional pictures...

If anyone is interested in making this a almost RTR**...

1. WERKS Pro Racing 7-Port Competition Off-Road .21 Nitro Engine w/ JP-2 Pipe

2. HiTec <Ultra Torque> HS645MG

3. Futaba <Coreless Motor> S9301

** Will require a Starter Box...

:yipi: OFNA Jammin X1 Buggy Roller :yipi:
*** This includes the items below... Get it now before it is gone!

** X1 Roller
** Panther Foam Inserts
** New Chassis
** Aluminum Differential Cups
** Spare Parts

NOTE HAD PLANNED TO CONVERT TO BRUSHLESS, IF INTERESTED CASTLE CREATIONS HAS A CONVERSION KIT FOR THE JAMMIN X1 ON SALE FOR A VERY LOW PRICE! :yipi: YES ONLY ___! :yipi:

:yes: If your interested in making this a RTR**... :oh:
1. WERKS Pro Racing 7-Port Competition Off-Road .21 Nitro Engine w/ JP-2 Pipe
2. HiTec <Ultra Torque> HS645MG
3. Futaba <Coreless Motor> S9301
** Will require a Starter Box...

PM Me with offers... Willing to sell as a Roller or as RTR**

:yipi: Additional Pictures are Available Upon Request :yipi:

Welcome to My Virtual Garage Sale...
:intello: Please review attached web album:
https://picasaweb.google.com/drstati...eat=directlink

:gasp: RC Parts Lot - Thinning Out Excess :gasp:

Refer to attached web album:
https://picasaweb.google.com/drstati...eat=directlink

:whip: Help Me Thin Out My Collection. And Finance the Coming Season... :whip:

A couple of great / awesome Off-Road RC Rollers and lot of extra parts for various vehicles...
Please look over the attached web album and let me know what you want...
The more you purchase, the better the deals...

I'm working on a price list; should post later today or tomorrow...

Willing to accept reasonable offer, but please "No Lowballers"...
This is not a sale of desperation.
*** I'll be adding additional items, so check back often.
*** Also I'll try to remove "SOLD" items in a timely manner.