RC-Monster Forums - MMP Sensor board

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- Castle Creations (https://www.rc-monster.com/forum/forumdisplay.php?f=34)

- - MMP Sensor board (https://www.rc-monster.com/forum/showthread.php?t=31967)

MMP Sensor board

Hi guys my MMP just stopped working, but its out of warranty, by about 3 month, I think its the sensor board, have all the lights working no motor out put in either mode.

who can I contact thanks guys

I gathered that!

I just meant sometimes castle comes on here, so like price wise for a new unit,and email contact. Thanks for your input

Quote:

Originally Posted by Jony Nitro (Post 427523)

I gathered that!

I just meant sometimes castle comes on here, so like price wise for a new unit,and email contact. Thanks for your input

Hi Jony,

Check a couple things first--

1. Make sure the sensors in the motor are working -- try it with another motor, or try the motor with another ESC.

2. Make sure the controller is in "sensored" mode.

3. Make sure the controller is calibrated correctly.

4. Do you get motor beeps?

5. Try the controller in "sensorless" mode. Does it work?

If all fails, you can do a non-warranty here:

http://www.castlecreations.com/support/repairs.html

Thanx!

Patrick

No beeps, tried my new SP 7.5 not worked, yes I did switch it over on the settings to sensored, then switched back. and yes recalibrated it, and used two different RX/TX combo