lipos for my emaxx
 

I need some lipos have NO idea what i am looking for. here are my specs
20120 speed control
10xl motor (or bigger i am buying a new one soon)
8 spider diffs
single speed with steel idler

It depends on if your looking for runtime or speed. How long do you need to run?

a tad of both. i want 30 minute run times minimum

I would say 8000mah 6S lipo would be awesome. And probably over an hour runtime.

OMFG. what kind of speed should i be getting? and exactlly what motor should i get ( cannot spend alot on my motor)

also how long do lipos last. if i charge and discharge and all of that. what should be the life on these?

I would say 55+ on 6S lipo with the 10XL. It really depends on exactly how well you take care of them. BTW, you don't discharge LiPo's like NiCad.

if i followed by the book instructions on how to take care of them?

It would depend on MANY things. How fast you charge then, how often you balance them, ect. And the biggest....the QUALITY of the cells. Theres really no telling. However, I would say, a couple hundred +

what batteries should i purchase than. from what company and all of that?

Is that 6s2p in series? or just one 6s? Just curious...

I would recommend 2 3S2P in series.

do i need to wire them myself? i am not good with that kind of stuff. only soldering plugs lol!

Actually, if you can solder plugs, wires are easier, just make sure you tin them before soldering together. someone here should be able to direct you to a wiring diagram....if your talking about batt packs, you should be able to choose preassembled packs or loose cells....

Ok, is this the 3s2p that would work? 11.1 volts 159.99? http://www.maxamps.com/index.html?la...d=38892.783403 Is this the price for two packs?

Obviously, i would need a new controller because i run the 9920, like maybe 12020?