RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   HPI Savage (https://www.rc-monster.com/forum/forumdisplay.php?f=30)
-   -   My BL-Savage (https://www.rc-monster.com/forum/showthread.php?t=3918)

andywpj 08.27.2006 03:15 AM

My BL-Savage
 
hello

here is my bl-savage , i made a motor mount for 540CXL , is lowdown motor.
i got 540C8XL to try and with a machine brake use 2-speed.

here is some picture.

47T/15T gears.
http://a12yunse.myweb.hinet.net/DSCF0476(001).jpg
http://a12yunse.myweb.hinet.net/DSCF0477(001).jpg

I have get some video is here.
ESC : Quark 125
Ext TVP
540CXL motor
14s GP4300 battery

http://a12yunse.myweb.hinet.net/savagebl.wmv

Here is my last complete motor with quark125
http://www.rcbig.idv.tw/bbs/rcbig/upload/8172-2-5.jpg

Serum 08.27.2006 05:24 AM

Here is someone with facilities.. :p

Did you made a support underneath the motor on the rear?

Serum 08.27.2006 05:25 AM

Topic moved to savage;

coolhandcountry 08.27.2006 08:50 AM

That looks like a good motor mount. LIke the idea of adjusting it without hard time. NICE!!!

andywpj 08.27.2006 11:29 AM

Hello serum,

sorry i don't understand, what is "support underneath" mean?
mayby i think ,you mean the feigao motor can't hold to jump or bashing right?
thank you.


Quote:

Originally Posted by Serum
Here is someone with facilities.. :p

Did you made a support underneath the motor on the rear?


cemetery gates 08.27.2006 12:53 PM

Quote:

Originally Posted by andywpj
Hello serum,

sorry i don't understand, what is "support underneath" mean?
mayby i think ,you mean the feigao motor can't hold to jump or bashing right?
thank you.


i think he means to support the back of the motor so the motor mount does not flex and change the gear mesh

Serum 08.27.2006 01:48 PM

That's right Cemetary!

Rtsbasic 08.27.2006 04:25 PM

Nice, I love your motor mount, must be really easy to change the gear mesh. If you fancy selling one of those, let me know.. :)

andywpj 08.27.2006 11:35 PM

oh i understand.
this mount is pretty tight, i try to push motor back down, it seem like unflex i am use 7075alu bottom 8mm L.
but i worry is motor, if i use 540L not "C" i think motor front can't hold, if motor get very hot that glue will loose, this is my worried.

yes, this mount easy to adj mesh like engine, just only one sorry.

sorry everyone, my poor english, but i am very like here and share my Car.

Serum 08.28.2006 01:02 PM

Don't worry about your english!

you need or a bit of flex, or put it down tight on the back side, for the reason you are mentioning.

Supporting it is the best way, i think.

andywpj 08.28.2006 02:09 PM

Thank suggest, i will to try next time.

by the way ,.
maybe this week me and my friend gonna try challenge faster Savage ... we plan use Castle Creations Phoenix 110HV controller with 29.6V or 44.4V Lipo on 1600kv motor,
we hope can get on top speed to 100KM or more......i am crazy..

Serum 08.28.2006 04:02 PM

that makes quite a difference with 12 cells nimh's. Savages are not built for speed. 44.4V will ruin that 1600kv motor.

Serum 09.25.2006 01:23 PM

Any updates on the speed project?

andywpj 09.28.2006 01:49 AM

bad weather,
if luck, maybe this week.

i am ready radar gun and get DV, hope anything well be smoothly.

Serum 09.28.2006 06:36 AM

You are not living in the Netherlands for sure! hottest September since 100 years.. We had allmost no rain during the past month. (which is rather uncommon for us dutchies..)


All times are GMT -4. The time now is 02:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.