Cooling on emaxx 7xl, mm...
 

I have ordered all the bits to get the emaxx back on the road, and just wanted to see if any anyone else with a similar set up has cooling problems.

7xl
MM controller
UBEC
2 x 7 cell ib4200's

Not the fastest set up around, but want to get a heads up and order the parts now if there's going to be problems..

Cheers

Its gunna be warm, but shouldnt have problems.

I would run a heat sink on the motor for sure, but you should be fine with that set up. Some run a fan on the esc too, this may help as well.

Will be fine but a heatsink is worth having on the motor.