Vid: BL Hyper7, now with 15T pinion
 

Got my 15T pinion in from Mike (great service Mike!!!!) and went out to do some testing. Gotta say it's pretty zippy. The MM ESC was 160 and motor was 120. Outside temp was 55. With the body off, the ESC was 133, so I need to work on the body to get some better airflow in there.

<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/1yx4ND6a76Y"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/1yx4ND6a76Y" type="application/x-shockwave-flash" wmode="transparent" width="425" height="350"></embed></object>

Sleebus

looked very fast!! i cant ever kep my mm esc cool... always about 150 also...

Nice! Looks good, definitely got some top end there...

Temps sound good esp for the motor... how long did you run to hit that temp?

Ummmm, I think a solid 10 - 15 mins or so. Pretty much just doing passes for the camera, and then just dorking around after I got the shots. :)

Nice video. It defiantely looks fast. Have fun with it.

Nice job Sleeb! Looks like a fun little toy!

Nice vid!

Looks to be alot better than before! Try some lipo in there! :)

Nice vid! yeah you can see the top end kick in! all in all its good.

IMO 15/46 is getting on the edge of being overgeared for a 10L. It's ok for some high speed running, but it's a little tall for some things... racing, bashing in grass, etc

Cooler is always better, but if the temps are still around 160 that's ok to me.

It looked to do nicely.

Thanks guys :) I'm pretty thrilled with the results too.

Sleeb