RC-Monster Forums - View Single Post - Pinion on a 5mm shaft.. is there a trick?

wallot · 05:45 PM

i made a flat spot but it did not help and pinion slid towards the motor and i spent lovely 30 minutes carefully removing it. Now i have loctite 243 on the set srew and seems to hold nicely.

i have to use Locitite 270 - green - the meanest - to hold drivecup set screws at place. blue 243 had no chance and i skipped red 262 to be safe :)

the power of Neu

	(#6)
wallot RC-Monster Titanium Offline Posts: 1,025 Join Date: Jan 2007 Location: Prague, Czech Republic	05.03.2007, 05:44 PM i made a flat spot but it did not help and pinion slid towards the motor and i spent lovely 30 minutes carefully removing it. Now i have loctite 243 on the set srew and seems to hold nicely. i have to use Locitite 270 - green - the meanest - to hold drivecup set screws at place. blue 243 had no chance and i skipped red 262 to be safe :) the power of Neu Radek V4 D8 - RX8, XERUN 4168SD F1-09 - Tekin RS Pro, 17.5t Redline, 2S LiPo Sakura Zero S - LRP, Saturn 20T, 2S LiPo EX-10 Eurus Last edited by wallot; 05.03.2007 at 05:45 PM.