I got the pics done but its raining hard out there, so I've not run again.
This pic shows the nuts I used as spaceers under the front diff mount.
This one shows the cut out I made to clear the chassis turn up and also the misalignment of the holes in the top of the mount.
Top view of the diff brace showing how far off the mount holes are.
this is individual to my buggy and tray, but I had to cut some of the curve off on the left hand side of the mount to clear my battery tray.
A general topess shot, sorry but its blured to pass the censors.
Plan View.
There is a bit of a mess of wires above the servo, I used my boat reciever its encased in silicone with extension leads sticking out for the servos ESC and Bec to plug into, it don't look good but its waterproof so great for boats and English weather.
And the last one, to show that it all fits under the body, just.