RC-Monster Forums - View Single Post - Does anyone know if the LSP Motor mount will fit a Lightning buggy?

nativepaul · 05.29.2007, 03:42 PM

Its not bolt in, but it can be made to work, its a little too wide, 3 mm too tall and the holes for the diff brace are offset in the wrong direction.

See my thread to see how I made it work, Mike asked me to design a new diff brace, and I did a 3mm spacer to go under the front diff brace, if I measured right and it fits, maybe mike could sell them with it as an adapter kit, or modify the LSP by that amount for the buggy.

	(#2)
nativepaul RC-Monster Aluminum Offline Posts: 522 Join Date: Jan 2007 Location: Sussex, England.	05.29.2007, 03:42 PM Its not bolt in, but it can be made to work, its a little too wide, 3 mm too tall and the holes for the diff brace are offset in the wrong direction. See my thread to see how I made it work, Mike asked me to design a new diff brace, and I did a 3mm spacer to go under the front diff brace, if I measured right and it fits, maybe mike could sell them with it as an adapter kit, or modify the LSP by that amount for the buggy.