Quote:
Originally Posted by aqwut
for conforming compound.. you could use high quality 100% silicone, and mix with lighter fluid untill it feels like pancake batter, but no thinner than this or it will never dry... you'll figure something out.. :D
|
I was going to make something like the M.Troniks, but I want to get to the components in case they fail, so I ruled that out. What I might do is use a conformal coating that comes in spray bottles, make a nice case out of Polycarbonate and add small fans on each side. After I receive the first controller, I'll take some dimensions and make a custom low profile liquid cooled heatsink. One thing I will do for the radiator will be to add TEC devices and low profile fans to cool the liquid down. I know a few places that makes small 5vdc water pumps. In the future, I want to make my own R/C trucks and buggies and I will also try to offer a ARTR or a RTR versions of them. I have all the drawings for the chassis and motor mounts. I found a place that will machine everything for $45HR, but I will see if Mike can help me out on this.