RC-Monster Forums - View Single Post - 9xl, 5s, Quark 125b + Lipo battery holders?

MTBikerTim · 09.13.2007, 12:05 AM

I would have to run two 3s packs on the savage and I would charge them as 2 seperate packs. Even though just looking at the specs of my charger it will do 6s. If I could get a special balancing lead I could do both at once. My charger won't go up to 8amps (for the 8000mah packs) but they will just charge slower.

As far as batteries go I was looking as the true rc custom packs. I am planning on getting two TrueRC 10c 11.1V 3S2P 8000mAh packs and running them in series. I assume 80A continuous is plenty for the savage on 6s on an 11xl. 60A max on the 11xl on the feigao data sheet if that means anything.

	(#24)
MTBikerTim Yip Yip Yip... Offline Posts: 1,489 Join Date: Aug 2007 Location: Australia	09.13.2007, 12:05 AM I would have to run two 3s packs on the savage and I would charge them as 2 seperate packs. Even though just looking at the specs of my charger it will do 6s. If I could get a special balancing lead I could do both at once. My charger won't go up to 8amps (for the 8000mah packs) but they will just charge slower. As far as batteries go I was looking as the true rc custom packs. I am planning on getting two TrueRC 10c 11.1V 3S2P 8000mAh packs and running them in series. I assume 80A continuous is plenty for the savage on 6s on an 11xl. 60A max on the 11xl on the feigao data sheet if that means anything.