RC-Monster Forums - View Single Post - CRT.5 build

lincpimp · 09.15.2007, 01:29 AM

I am using a 4s 4000 maxamps pack. Basically took the emaxx chassis and cut out one battery tray. Made a plate to go across the top off the CD and stood the tray on its side. The stock hold down can be used with 3s but I used longer screws with 4s. Heres a few pics, works fine for me. I have the same setup in a LS10, slightly larger truck, but slightly lighter than the crt.5!? The pics show a 20 tooth pinion, that is what I ran with the 3s setup.

	(#51)
lincpimp Check out my huge box! Offline Posts: 11,935 Join Date: Aug 2007 Location: Slidell, LA	09.15.2007, 01:29 AM I am using a 4s 4000 maxamps pack. Basically took the emaxx chassis and cut out one battery tray. Made a plate to go across the top off the CD and stood the tray on its side. The stock hold down can be used with 3s but I used longer screws with 4s. Heres a few pics, works fine for me. I have the same setup in a LS10, slightly larger truck, but slightly lighter than the crt.5!? The pics show a 20 tooth pinion, that is what I ran with the 3s setup. Alot of Savage parts for sale!!!