RC-Monster Forums - View Single Post - video: 10sA123 Buggy with eagletree inserts

othello · 09.23.2007, 07:47 PM

What kv is your Ion-X motor? Is that a Hacker C50XL?

I don't know how the BK Esc would behave if you hit its RPM limit.

The Jazz is limited to 65A which corresponds to 2340 Watt @36V ... this should suffice. Maybe you'll have to cut the heatshrink right where the cooling plate sits to optimize heat transfer, when using the ESC up to its full potential. With 8s and an average of 10A my Jazz only gets warm to the touch (my cooling plate is not covered with heatshrink and i have a good airflow around the ESC when driving).

	(#33)
othello HV basher Offline Posts: 392 Join Date: Jun 2007 Location: Austria (Europe)	09.23.2007, 07:47 PM What kv is your Ion-X motor? Is that a Hacker C50XL? I don't know how the BK Esc would behave if you hit its RPM limit. The Jazz is limited to 65A which corresponds to 2340 Watt @36V ... this should suffice. Maybe you'll have to cut the heatshrink right where the cooling plate sits to optimize heat transfer, when using the ESC up to its full potential. With 8s and an average of 10A my Jazz only gets warm to the touch (my cooling plate is not covered with heatshrink and i have a good airflow around the ESC when driving).