RC-Monster Forums - View Single Post - Spektrum Glitching

BrianG · 09.24.2007, 05:05 PM

It might also be that some noise is entering the receiver via the power line (or on a servo line), not the antenna. You could try installing a 1000uF 10v cap on the power and ground lines of the CH3 port, or Y it into the BEC line. It's gotta be close to the RX for best benefits. It might not help, but it won't hurt, and it will help the BEC/UBEC cope with any current draw surges from the servo(s).

	(#8)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	09.24.2007, 05:05 PM It might also be that some noise is entering the receiver via the power line (or on a servo line), not the antenna. You could try installing a 1000uF 10v cap on the power and ground lines of the CH3 port, or Y it into the BEC line. It's gotta be close to the RX for best benefits. It might not help, but it won't hurt, and it will help the BEC/UBEC cope with any current draw surges from the servo(s).