RC-Monster Forums - View Single Post

DrKnow65 · 10.23.2007, 12:01 AM

I do plan to solder two 470uF caps to the steering and esc power wires, but that's to help keep voltage and EMI in check.

Then there's the three 1800uF caps I'm putting on the esc power wires on the opposite side of the chassis (more as something useful to help balance out the weight of the esc, extra heatsink, and fan combo). I'm going to mount the reciever, CC BEC, and 4S DPM opposite the esc too... Starting to think I may need to get 1/8th scale springs for my XXXT.
Mabey me and ZPB need to go to a caps anaymous meeting ;)

	(#29)
DrKnow65 RC-Monster Aluminum Offline Posts: 998 Join Date: Oct 2007 Location: Colorado	10.23.2007, 12:01 AM I do plan to solder two 470uF caps to the steering and esc power wires, but that's to help keep voltage and EMI in check. Then there's the three 1800uF caps I'm putting on the esc power wires on the opposite side of the chassis (more as something useful to help balance out the weight of the esc, extra heatsink, and fan combo). I'm going to mount the reciever, CC BEC, and 4S DPM opposite the esc too... Starting to think I may need to get 1/8th scale springs for my XXXT. Mabey me and ZPB need to go to a caps anaymous meeting ;) If I could only draw what I see in my head, then afford to build it, and finaly get to play with it...