RC-Monster Forums - View Single Post

glassdoctor · 10.28.2007, 06:32 PM

Looks like a solid 15C to me... 3.5v @110A (13.8C).. if you were to pull 120A (15C) I doubt it would drop below 3.2-3.3 which is a pretty common watermark for testing max C.

But opinions vary of course on what exact standards should be used. Also, our test runs only show spikes and not a constant load, so it may be different than what a proper mfg test would yield.

I'm also curious to see how a "1p" A123 would do.

	(#7)
glassdoctor TEAM FUSION Offline Posts: 2,041 Join Date: Jul 2006 Location: Iowa... Hawkeye country	10.28.2007, 06:32 PM Looks like a solid 15C to me... 3.5v @110A (13.8C).. if you were to pull 120A (15C) I doubt it would drop below 3.2-3.3 which is a pretty common watermark for testing max C. But opinions vary of course on what exact standards should be used. Also, our test runs only show spikes and not a constant load, so it may be different than what a proper mfg test would yield. I'm also curious to see how a "1p" A123 would do. Jammin CRT MM/Neu 1515 1700kv Losi 8IGHT MM/Neu 1512 1900kv Kyosho 777 T4 MM 5700 B4 LRP XX4 MM 7700 old losi xxcr, MM4600 4s lipo 70mph+