RC-Monster Forums - View Single Post

mkrusedc · 10:59 PM

I used a MM and a Neu. I hated the cogging but you can minimize it. In th computer set up for the throttle pull it down at about the 30% mark so that it becomes a smooth curve. This helps but if you want smooth running use the MGM. My 1515/1y 2200kv handles 4s easily. Here are some settings:
settings are:
brake 30%
punch 80%
start pwr low
drag brake disabled
motor timing low

	(#4)
mkrusedc NeuMaxx Offline Posts: 1,286 Join Date: May 2007 Location: Near New Orleans	10.29.2007, 10:58 PM I used a MM and a Neu. I hated the cogging but you can minimize it. In th computer set up for the throttle pull it down at about the 30% mark so that it becomes a smooth curve. This helps but if you want smooth running use the MGM. My 1515/1y 2200kv handles 4s easily. Here are some settings: settings are: brake 30% punch 80% start pwr low drag brake disabled motor timing low E-Maxx Neu 1515/1y/f, MGM, 5s, FLM, UE, RPM, single speed Last edited by mkrusedc; 10.29.2007 at 10:59 PM.