RC-Monster Forums - View Single Post

captain harlock · 09:14 PM

I bought a Team Associated T4 carbon fiber battery strap for my CRT.5 truggy and I had to drill in a 6mm hole on both sides of the strap to make use of it on my truggy. Now, the only thing left to do and make the strap more suitable for the truggy is to shorten the extra lenghts at both sides. I added velcro tapes above and under the lipo pack and I also put one on the CF strap to make a strong press on the batt so as to avoid sliding.

If Mike can buy a pile of these T4 CF straps and modify them to the required length, it'll be more convenient for him than to make an aluminum one from scratch. Not to mention that CF looks more killer than aluminum when both are combined.

	(#1)
captain harlock RC-Monster Captain Offline Posts: 2,745 Join Date: Mar 2005 Location: Saudi Arabia	T4 CF Battery Strap for the CRT.5. - 12.19.2007, 09:11 PM I bought a Team Associated T4 carbon fiber battery strap for my CRT.5 truggy and I had to drill in a 6mm hole on both sides of the strap to make use of it on my truggy. Now, the only thing left to do and make the strap more suitable for the truggy is to shorten the extra lenghts at both sides. I added velcro tapes above and under the lipo pack and I also put one on the CF strap to make a strong press on the batt so as to avoid sliding. If Mike can buy a pile of these T4 CF straps and modify them to the required length, it'll be more convenient for him than to make an aluminum one from scratch. Not to mention that CF looks more killer than aluminum when both are combined. Attached Thumbnails The name is Alawi. You can call me Al. Nice to meet you! Last edited by captain harlock; 12.19.2007 at 09:14 PM.