RC-Monster Forums - View Single Post

MetalMan · 01:02 AM

I thought I had a thread on this truck here, but it turns out it was on the temporary forums. Here's the old setup:

http://www.rc-monster.com/tempforum/...2&postcount=27
http://www.rc-monster.com/tempforum/...4&postcount=28
And a vid of the old setup:
http://video.google.com/videoplay?do...45575189089257

The chassis is an extended low CG chassis from FLM.

Since I just received my HV110 back from CC, this truck will live again. But since that 12XL's rotor broke apart, the truck needed a new motor. That's where the KB45 10XL (1200 kv) came in. The motor plate had to be modified due to the 30mm bolt pattern and 4mm mounting screws.
I remade on of the brake linkages, so now the brakes are stronger than before, which is nice considering the weight of the truck.

New pics will be up soon.

	(#1)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	HV Savage (56k view with caution) - 12.21.2007, 01:50 PM I thought I had a thread on this truck here, but it turns out it was on the temporary forums. Here's the old setup: http://www.rc-monster.com/tempforum/...2&postcount=27 http://www.rc-monster.com/tempforum/...4&postcount=28 And a vid of the old setup: http://video.google.com/videoplay?do...45575189089257 The chassis is an extended low CG chassis from FLM. Since I just received my HV110 back from CC, this truck will live again. But since that 12XL's rotor broke apart, the truck needed a new motor. That's where the KB45 10XL (1200 kv) came in. The motor plate had to be modified due to the 30mm bolt pattern and 4mm mounting screws. I remade on of the brake linkages, so now the brakes are stronger than before, which is nice considering the weight of the truck. New pics will be up soon. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz Last edited by MetalMan; 04.18.2008 at 01:02 AM.