RC-Monster Forums - View Single Post - XTM X-Terminator BL and Lipo 1/8 Buggy

MetalMan · 09.08.2005, 08:45 AM

The stock chassis did have the front kickup. I actually had to do that because the plate that goes from the differential case to the bellcrank has a bend in it. Besides, kickup is actually a good thing :).

I have marked out the holes to mount the servo plate, so I will do that next. Now I am thinking about the pushrod suspension. I may not be able to do it because it could interfere with body mounting.

	(#25)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	09.08.2005, 08:45 AM The stock chassis did have the front kickup. I actually had to do that because the plate that goes from the differential case to the bellcrank has a bend in it. Besides, kickup is actually a good thing :). I have marked out the holes to mount the servo plate, so I will do that next. Now I am thinking about the pushrod suspension. I may not be able to do it because it could interfere with body mounting. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz