RC-Monster Forums - View Single Post

snellemin · 09:48 PM

I finally got around to finishing my racer. It's the old school fine design prostock. I had to make a new driveshaft for it. Used my drill press to sand down some 1/4" 6061 tubing to make it fit. The originals were too long with the new aluminum hubs.
A123, mamba and hacker powered. Clueless how fast it's going to be.

	(#1)
snellemin 2 KiloWatt RACER Offline Posts: 2,496 Join Date: May 2007 Location: Houston	My onroad racer is ready - 03.25.2008, 03:45 PM I finally got around to finishing my racer. It's the old school fine design prostock. I had to make a new driveshaft for it. Used my drill press to sand down some 1/4" 6061 tubing to make it fit. The originals were too long with the new aluminum hubs. A123, mamba and hacker powered. Clueless how fast it's going to be. 6 KiloWatt A123 Racer GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW Last edited by snellemin; 03.25.2008 at 09:48 PM.