RC-Monster Forums - View Single Post - XTM X-Terminator BL and Lipo 1/8 Buggy

MetalMan · 09.08.2005, 08:42 PM

I don't have any controllers right now :(. Mike has my 9918 (seeing if he can fix it), and my MGM 120amp (old version) is in the Czech Republic right now (although MGM won't tell me that it is).
The 9918 was mounted to the rock guard with velcro inbetween the rock guard and the controller. There were also zip ties securing the controller. The rock guards allowed some give (as plastic is flexible), but I guess it just bottomed out too hard. With the new chassis, I will probably be mounting the controller on the front left part of the chassis. That seems to be the only spot for it.

	(#29)
MetalMan RC-Monster Mod Offline Posts: 5,297 Join Date: Mar 2005 Location: SoCal	09.08.2005, 08:42 PM I don't have any controllers right now :(. Mike has my 9918 (seeing if he can fix it), and my MGM 120amp (old version) is in the Czech Republic right now (although MGM won't tell me that it is). The 9918 was mounted to the rock guard with velcro inbetween the rock guard and the controller. There were also zip ties securing the controller. The rock guards allowed some give (as plastic is flexible), but I guess it just bottomed out too hard. With the new chassis, I will probably be mounting the controller on the front left part of the chassis. That seems to be the only spot for it. SH Z-Car, Custom Crawler, 8s Savage, 12s XTM XLB 1/7 buggy, 4wd 4-link rear/IFS Pro4 truck, Custom Hyper 10 Short Course, Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz