RC-Monster Forums - View Single Post

DrKnow65 · 04.30.2008, 01:23 AM

I believe that the bearings are a concern Linc, I'm thinking he is also concerned about the rotational torque as well. I would think keeping a center diff is important. Looking back to sikes DDRevo it seems that killing diffs was a problem, the motor shaft was not the weak link, the diffs were.

I think sikes nailed it pretty good with the outrunner-maxx (3 diffs and a slipper). Only thing is, no extra support for the outrunner bearings, which seems just fine so far...

	(#28)
DrKnow65 RC-Monster Aluminum Offline Posts: 998 Join Date: Oct 2007 Location: Colorado	04.30.2008, 01:23 AM I believe that the bearings are a concern Linc, I'm thinking he is also concerned about the rotational torque as well. I would think keeping a center diff is important. Looking back to sikes DDRevo it seems that killing diffs was a problem, the motor shaft was not the weak link, the diffs were. I think sikes nailed it pretty good with the outrunner-maxx (3 diffs and a slipper). Only thing is, no extra support for the outrunner bearings, which seems just fine so far... If I could only draw what I see in my head, then afford to build it, and finaly get to play with it...