Quote:
Originally Posted by captain harlock
Great to hear.
The only thing that's worrying me now is if I'm going to use a four pole motor ( I've already have the Neu). The motor I have is the 1512/1d/s motor( 4875 rpm) which I'm going to use on my MRX-4X along side the R1Pro and 4s2p FP 2170mah. Gearing will be 46:20.
I think it'll surely need a fan in this case. The Neu will not go easy on the controller, and I think the esc will not live long enough with such a setup.
|
The Neu shouldnt be a problem. I ran a Neu 1512/2.5D on mine for a short time. No issues. Of course I didn't spin mine
that fast.
Quote:
Originally Posted by SpEEdyBL
1512 1d on 4s 2170 mah? I think you seriously need to reconsider you setup or else something may blow up. The motor is really a 3s motor since its not a good idea to run it past its rpm limit, and there is no way the 2000 mah batteries will support the required current unless they are rated for 60c continuous.
|
I'm with you speedy. Thats a hell of a current that setup is gonna pull.
Quote:
Originally Posted by captain harlock
Well, I'm using four in series and two in parallel in order to double up the current and capacity as well. The motor will go over 80k rpm easily, but I'm only doing it for speedruns and fun. What is worrying me is whether the controller needs a fan with such a setup or not and if it's gonna handle it well.
|
I think you will not only need a fan, but probably a fire extinguisher as well. Not sure the R1 is gonna handle that very well. Possibly thoug if you are just doing it for short bursts and not trying to run like that for more than a few seconds at a time. Sounds to me like you need a MMM for that. Or a big MGM 22416.