Quote:
Originally Posted by lincpimp
Got mine today from Mike. Installed it in MM's old revo with the slipperential. Running a hacker 7xl b50 on 4s (2 trakpower). Ran it for 15min and it worked fine. This is a high draw setup, but the esc stayed cool. I used the internal bec and it worked fine for me, so I guess that I got a good one! Mine came with connectors in a little baggy, so I used them. Nice connectors, I will have to buy some more, what size are they, 6.5mm?
|
That is an awesome setup! When I had that Revo I ran a Feigao 7XL through a MM on 5s2p A123, with a 20t pinion. Top speed was ~45mph, and the 7XL (finned can) didn't go over 160deg. F. The MM on the other hand would thermal in a couple minutes without a fan. If only the MMM had been in production while I still had that truck...
And yes, 6.5mm plugs.
SH Z-Car, Custom Crawler, 8s Savage,
12s XTM XLB 1/7 buggy,
4wd 4-link rear/IFS Pro4 truck,
Custom Hyper 10 Short Course,
Belt-Drive Mammoth ST 1/8 truggy, 4s 17.5 MM Pro HPI Blitz