Quote:
Originally Posted by crazysavage
Is it possible/feasable/smart to just slap in the MM/7700 and just spend $180 more to slap in a second one with a y harness, running 2 8000mah 7.4's. This would slice the load in half, stay with in the weight of the original truck since it has 2 industrial motors and is set up to run heavy sub-c cells. I realalize that this would not increase the speed over what one brushless unit would do but it should be reliable, right? Would this unit need a bec eliminator set up, I would think not. Th  anks again for the help! |
You would be much better off getting the BEC and using the existing Mamba Max and using the lipos as 4s 8000, and getting 1 larger motor, say a 9xl for $70ish. 2 Castle motors dont work well or for very long in a monster truck, they are just too small and too high of a KV., if you want reliable, dual setups arent the way to go. I ran a v-twin for 6 months and its alot of tinkering, hit and miss and close watching temps...Sell the CC motor on ebay for $50 ish , buy a CC bec and ?Xl motor only $40 out of pocket. My opinion