RC-Monster Forums - View Single Post

E-Revonut · 08.20.2008, 06:23 PM

I made a plate that attaches on top of the center diff to hold my esc and rx. The location isn't the problem, it's the double sided tape! make a plate out of aluminum and transfer the mounting holes for the top of diff onto it and drill them out, then put the screws through everything. I used velcro and a zip tie for my mm esc and just velcro on the rx. 20+ runs and no problems!

	(#25)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	08.20.2008, 06:23 PM I made a plate that attaches on top of the center diff to hold my esc and rx. The location isn't the problem, it's the double sided tape! make a plate out of aluminum and transfer the mounting holes for the top of diff onto it and drill them out, then put the screws through everything. I used velcro and a zip tie for my mm esc and just velcro on the rx. 20+ runs and no problems!