Quote:
Originally Posted by Mozzy
I think the kv of those motors is too high. They need to be under 2000kv to interest me.
Word of advice to anyone, DON'T BUY FROM FINE DESIGNS as I had a $50USD charge to my creditcard on the 20th August which I found last night checking my statement online & I haven't bought anything from them in over 2mths. 31st May to be exact.
Contacted my bank & reported it & they're going to investigate it.
He's a thieving lying bastard!!! I ordered 6 Mamba Monsters from him in May & he keeps telling me that they haven't arrived from CC, yet on his website it shows he has them in stock!!
|
I didn't know he stole money from people, but i did know that he lies about alot of stuff, kaz the minotaur told me exactly what he was lying about, but i forget the exact details, he paints motors differently and sells them for alot more money.
The neu motors are probably the best around, what your looking for can probobly be found here:
http://www.castlecreations.com/produ...motors/nm.html they are hand made.
Quote:
Originally Posted by Finnster
Does any one have a problem with the shocks on their muggy? I got a used nitro one I'm thinking about converting and have been running nitro for a bit. I wanted a big fat basher that tough but EZ to work on.
So far in a week I've blown the seals on two F shocks, snapped a shaft at the end on the F, and bent a rear shaft. WTF. The shocks are so big they could be on my 1:1 car, yet I've never had this much trouble with any shocks. Also, the steering is freaking sloppy. I've replaced the turnbuckles and drag link already, was good for a day, and is already getting sloppy again...
|
I haven't had any problems with my shocks, but I had a ton of trouble with my steering link, I had alot of resistance coming from it. here's what i did:
http://hdrcvideos.com/forums/viewtop...111826#p111826
and this could help solve your shock problem maybe?
http://www.horizonhobby.com/Products...rodID=LOSB2822